Make Sure Your New Build Is Part Q Compliant

With more people than ever before planning a new build or self build, making sure you stay on the right side of Building Regulations is vital if you want to avoid any potentially expensive and time-consuming problems with Building Inspectors. And whilst many of the current Building Regulations have been in place for many years, one of the latest – the introduction of PartQ – remains in its infancy.

Here, Matt Chambers – National Sales Manager at Dale Joinery looks at the requirements placed upon those wanting to build their dream home.

Part Q Building Regulations

In October 2015, Building Regulations for England were changed, introducing the PartQ classification to help increase the security performance of windows and doors being installed in new build properties. Phased in over the following 12 months, they became compulsory on October 1, 2016.

The new mandatory classification, seeks to ensure high security standards for new build homes including homes created by change of use such as barn conversions.

So what does that mean for builders, developers and self-builders? For any new build you are working on, the windows and doorsets being used must be manufactured to a design that has been successfully tested to meet the security requirements of PAS 24:2012.

Approved Document Q is designed to ensure the prevention of unauthorised access to dwellings (including flats). As part of this, doors and windows or roof lights which could be accessed need to resist physical attack by a casual or opportunist burglar.

They therefore must be sufficiently robust, fitted with appropriate hardware and most importantly, be proven to have security performance.

The requirement set out by the government is that, “Reasonable provision must be made to resist unauthorised access to any dwelling and other buildings exposed to comparable risk”.

Simply put, anyone building a new home must install windows and doors which are shown by test to meet the required performance as detailed in PAS 24: 2012. This will mean proving to building inspectors that the windows and doors selected for the project are fully certified and that you are able to provide full product details for each design and construction with full supporting test reports for each product in the range supplied and installed.

Products meeting the requirements of the Secured by Design Scheme will be deemed to meet the recommendations.

For further advice on Part Q compliance for your new timber windows and doors, contact our expert and friendly team online.

Where Does It Apply?

PartQ does not apply to any building work started before 1st October 2016 – only those started afterwards.

Specifically it looks at windows and doors that could be easily accessed such as:

a) A doorset or window, any part of which is within 2m vertically of an accessible surface such as the ground or basement level, or an access balcony

b) A window within 2m vertically of a flat or sloping roof (with a pitch of less than 30 degrees) that is within 3.5m of ground level

In addition, doorset letter plates should have a maximum aperture of 260mm x 40mm and be designed to hinder anyone from removing keys with a stick or by inserting their hand by incorporating a flap or other feature to restrict access.

The main door into a dwelling should have a viewer or other means to see callers, such as clear glass either in the door or adjacent window, and be fitted with a door chain or door limiter.

In practice, Building Control Inspectors may apply their own judgement to which doorsets and windows will be considered vulnerable but it is worth knowing what the guidelines set out.

Ultimately the Building Inspector will judge whether a project meets the requirements of the Regulation. If you are in any doubt it is vitally important that you discuss this with the relevant building control body.

As with all Building Regulations, this will be policed by the Building Control Inspector (either an Approved or Public Sector Building Inspector) and there are examples of self builders not adhering to PartQ and being asked to remove the existing windows and doors and replace them with certified ones – a very costly issue to have to deal with.

Compliance

All aspects of the window and door system selected needs to be tested for PartQ Building Regulations so it’s vitally important that you use a window and door manufacturer whose products are fully certified.

Whilst many self-builders may like the idea of using a joinery firm that is small and local to them, you must ensure that the joinery firm you are looking at using are PartQ certified for all of the products you are looking to install. Individual window and door styles must all be tested and certified to the new standard.
Clearly the classification is designed to have a positive impact on the security of windows and doors for new build properties and for leading window and door companies like ourselves, testing existing product ranges is a major undertaking.

And for smaller joinery firms the combination of time and cost has prohibited them from testing their products against PartQ – so it is very much buyer beware.

If you are also thinking of buying door and window sets from abroad, again, be careful to ensure that the manufacturer or supplier you re sourcing from is compliant.

One of the most effective ways to ensure compliance is to: 

i) Use a door and window supplier that is fully PartQ compliant and ask to see their certification and evidence for any and all of the door and window styles you are looking at.

ii) Select a supplier that can deliver the door and window products to site fully factory finished ready and ready to fit.

FAQs

What is part Q of the UK Building Regulations?

Part Q of building regulations refers to th security of homes and dwellings. It’s designed to ensure that all entry points to a property, which include windows and doors, provide a certain level of security against unauthorised access.

All windows and doors that are compliant with approved document part Q will have been rigorously tested to ensure it meets the requirements of PAS 24. You can learn more about approved document Q here.

When did part Q become part of Building Regulations for new builds?

Part Q became part of UK building regulations on 1st October 2015. It applies to new build houses and flats.

Dale Joinery

If you want to find out more about the standard and how that affects your window and door choices contact Dale Joinery on 0800 030 2222 or email sales@dalejoinery.co.uk and we can help with your enquiry. Alternatively, feel free to download our brochure or request a physical brochure for free to learn more about our superior range of timber windows, doors and roof lanterns.